1.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
For sale a complete auger dredge package, featuring a 2015 model IMS 7012HP Versi-Dredge. This unit has only about 400 hours total time, located in West-Afrika and transportable in one truck. For more information please give us a call +31657542770
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 15.70 m | 51.5 feet | ||
| Width: | 3.66 m | 12 feet | ||
| Height: | 3.20 m | 10.5 feet | ||
| Draft: | 0.914 m | 3 feet | ||
| Displacement: | 27,400 kg | 60,500 lbs | ||
| Weight: (less fuel) | 21,636 kg | 47,700 lbs | ||
| Floatation (Pontoons): | ||||
| Two (2) Pontoons: | 143 x 1,092 x 11,887 mm | 45 x 43 x 468 inches | ||
|
10 ga. Steel sides and bottom w/ 1/4 " diamond deck; internal bulkheads & stiffeners; |
||||
| & painted w/ a marine grade epoxy-urethane paint. | ||||
| Dredging Capacity | ||||
| Dredging Depth: | 9.10 m | 30 feet | ||
| Cut (width x depth): | 3,430 x 660 mm | 135 x 26 inches | ||
| Engine | ||||
| Make/Model: | John Deere Diesel/6135HF070(6 cylinder - 13.5L) | |||
| Power @ 2,100 RPM: | 317 kW | 425 hp | ||
| Fuel Capacity: | 1,516 liters | 400 gallons | ||
| Fuel Consumption: | 79.4 liters/hr | 20.6 gallons/hr | ||
| Hydraulic Systems | ||||
| Circuit #1: | Slurry Pump; 7.9 in/rev. 80 gpm (5.05 liter/sec.) @ 5,500 psig | |||
| Circuit #2: | Cutter head, Boom, Winches and STARWHEELs, 7.9 in3/rev. load | |||
| sense, 72 gpm (4.54 liter/sec.) @ 2,500 psig | ||||
| Reservoir: | 454 liters | 120 gallons | ||
| Filtration: | 1 tank mounted return filter with a 10 micron (min.) rating with | |||
| an indicator & cab warning light. Slurry pump circuit remote charge | ||||
| filter 6-micron (min.) rating with an indicator and cab warning light. | ||||
| Filter with water removal capability is optional. | ||||
| Cutter Head | ||||
| Cutter Bar: | ||||
| Diameter: | 660 mm | 26 inches | ||
| Length: | 3,430 mm | 135 inches | ||
| Drive: | Recessed dual hydraulic motor; direct drive with no gear reduction | |||
| Speed (variable): | 0 to 95 rpm @ 2,500 psi | |||
| Torque: | 23,885 in-lbs (2,969 N-m) @ 2500 psi (peak) | |||
| Cutter Tip Force: | 1,837 lbs. (8,171 N) | |||
| Dredge Pump | ||||
| Type: | GIW Cast Iron LCC-M 250-660 | |||
| Discharge Diameter: | 254 mm | 10 inches | ||
| Suction Diameter: | 304 mm | 12 inches | ||
| Impeller Diameter: | 660 mm | 26 inches | ||
| Sphere Passage: | 127 mm | 5 inches | ||
| Pump Performance: | 315 liter / sec@38 m | 5,000 GPM / sec @ 125 feet | ||
| Controls | ||||
| Electronic joystick controls are provided in a climate controlled cab. | ||||
| Propulsion | ||||
|
STARWHEEL® Drive Self-Propulsion system; cable drive optional |
||||
| STARWHEELs® are individually operated for high maneuverability | ||||
| Speed (variable) | ||||
| 0 to 15 rpm (starwheel drive) | ||||
| 0 to 55 fpm (cable drive) | ||||
| Electrical System | ||||
| Voltage: | 12 volt, negative ground | |||
| Alternator Output: | 130 Amp | |||
Keywoord: Dredger, IMS 7012, mud cat, sand, horizontal